DenSureFit Kit Contents & Supplies Needed

Before You Begin

What You’ll Need

In addition to the parts included in your kit, it will help to have the following items on hand:

• A clean, dry towel
• Dish soap
• Rubbing alcohol & cotton balls/pads
• Scissors
• A timer or stopwatch

Inside The Kit

Primer (½ bottle)
DenSureFit PrimerOne thin, even coat of primer makes DenSureFit silicone stick to your denture. Your unopened primer bottle will look slightly less than ½-full (1 ml total). Proper use only takes half of the primer provided (.5 ml) to prime one denture plate. The remaining primer is intended for touch-ups after your first silicone application.

 

Primer Swabs

Use each primer swab only once.
Quickly dip the swab ONE TIME ONLY and REMOVE IMMEDIATELY from the primer!

 

Silicone Applicators (x2)

The silicone goes on after the primer coat.
It’s the magic that makes your denture snug like never before.

• DO NOT twist or open your silicone applicator until you are ready to apply it to your denture! Otherwise, the silicone will dry out, and you will waste your silicone.
• WHEN IT’S TIME TO OPEN, locate the black arrow on the tube. Hold the orange barrel still and firmly in one hand. With your other hand, TWIST clear tabs on the tip in the direction of the arrow (clockwise) until you hear/feel the “click.” If it does not click, or if you twist opposite the arrow, your silicone may squeeze out of the sides of the applicator tip and become unusable.
• Use ALL the product in one applicator to reline one denture plate. The second applicator is for a SNUG-UP application. Most people require two applicators to get snug.
• Use only one applicator of silicone at one time (i.e., one for each application). After 4 minutes of curing time, assess your fit. If you’re not snug, you can add another applicator of silicone over the top of the first layer. (Follow Snug Up instructions for placement.)